Mask Bags & Blackout Covers

USA

All of our products are proudly
made in the USA

USA

The Mask Bag™

Click meThe MBI
for better view

Made of heavy polyester fleece and are designed to be hung in your jump seat or turnout rack by either the draw cord or by the "D" ring sewn into the side. Fit most any mask available including MSA, SCOTT 2A, AV2000, AV3000, ISI, SURVIVAIR, DRAEGER, ETC. Approx. 13''W x 15"D.
Available in: BLACK , MBI - 100.
RED is now available, MBI-101
$14.00 each plus actual shipping cost.

The Mask Bag II ™

Click meThe MBII
for better view

Our new bag is 100% cotton canvas lined with a heavy polyester fleece that is breathable and absorbent. This bag is constructed with the same high quality design as our original but made even heavier duty to last through years of abuse.
Approx. 13"W x 15"D
Available in:, BLACK (MBII - 200),
RED (MBII - 201), BLUE (MBII - 202), & SAFETY YELLOW (MBII - 203)
$19.00 each plus actual shipping cost.

The Mask Bag III - 100 ™

Click me
for better view

The MBIII - 100 is made of heavy polyester fleece material, the same as the MBI, but tapered with the same design as the MBIII (shown below) to fit the SCOTT AV2000 or 3000 face piece.
Available in: BLACK, MBIII - 100
RED is now available, MBIII-101
$14.00 each plus actual shipping cost.

The Mask Bag III ™

Click me The MBIII
for better view

This bag is constructed with the same design as our MBII but with a tapered shape to fit with the SCOTT AV2000 or 3000 face piece. Approx. 13"W x 15"D
Available in:, BLACK (MBIII - 300), RED (MBIII -301), BLUE (MBIII - 302), & SAFETY YELLOW (MBIII -303)
$19.00 ea. plus actual shipping cost.


The Mask Bag IV-
L
™

Click me
The MBIV
for better view

This bag is made of heavy 1000 denier Cordura nylon or 10 oz cotton canvas with a heavy fleece lining. It is specifically designed for the Scott AV2000 or 3000 masks. It has a velcroe closure and a chrome plated metal "D" ring for hanging convenience. Approx. 8"H x 7"L x 4"W. Available in: BLACK (MBIV - 400), RED (MBIV - 401), BLUE (MBIV - 402) Safety YELLOW (MBIV - 403)
$25.00 ea. plus actual shipping cost.

The Mask Bag V ™

Click meThe MBV
for better view

This bag is made of heavy 1000 denier Cordura nylon, is designed to be roof mountable and closes with a thick strip of velcro.
Approx. 15"H x 9"L x 6"W
Available in: BLACK (MBV - 200),
RED (MBV - 201), & SAFETY YELLOW (MBV - 203)
$19.00 each plus actual shipping cost.

The Blackout Cover ™

Click me forThe Blackout Cover

better view

Train safe and simple without the lengthy process of taping, tieing, gluing, etc., etc. Slip this 100% polyester cover over your mask and in seconds you're ready to train. It's that simple! With approximately 90% light reduction, the blackout cover produces realistic visual and psychological conditions for training - anywhere, anytime - without the normal hassles associated with training evaluations. Protects your mask during training and can be left on for protection during storage. We have covers to fit MSA ULTRA ELITE, ULTRA LITE II, SCOTT 2A, 2.2, ISI, SURVIVAIR, SURVIVAIR SIGMA, DRAEGER, & INTERSPIRO.
$9.00 each plus actual shipping cost.


The Eye Glasses Bag

Click me for The Glass Bag
better view

Tired of your eyeglasses taking a beating every time you have to run? Nowhere to put those spectacles during training evolutions? Try our new glass bag! It's made of heavy 10oz. cotton canvas (red, black, yellow or blue) and lined with soft polyester fleece. The bag closes with two small tabs of velcro, is approximately 4" x 8", large enough for any type of glasses, and has a small plastic clip that attaches to any small cord, "D" ring or belt loop. The Glass Bag is designed to be attached to THE MASK BAG
so that it will always be close at hand in an emergency.

Available in:, BLACK(GB - 200), RED(GB - 201), BLUE(GB - 202), or YELLOW(GB - 203)
$6.00 each plus actual shipping cost.


The Shield Protector
™

Click me for

better view

Protect your expensive gold plated shield and save hundreds if not thousands of dollars now!

Installs in seconds, and removes in seconds.

Available in black or
red.

SP1-100 or
SP1-101

$12.00 each plus actual shipping cost.
 
The Goggles Protector
™

Click me forThe Goggles Protector

better view

Protects your goggles from being damaged by dirt, fire brands, etc. while not in use.

Slips on and stays on with elastic drawcord sewn into protector. No velcro, clips, etc.

These protectors are made of Nomex but may not protect goggles in severe heat conditions such as flashover as they are not insulated.

Available in yellow, red or special order in black.
GP1-100(black) 101(
red) or 103 (yellow)

$12.00 each plus actual shipping cost.
 

Click Here To Go To Our Brochure
 

USA

All of our products are proudly
made in the USA

USA

   

OUR POLICY

We believe in approval samples. Try our products for 30 days. If you don't like it, return it. All products have a one year warranty. All samples will be invoiced and become due in 30 days. Shipping is no longer included on domestic retail orders. We will add actual shipping costs to all orders commencing January 1, 2002. International, APO, FPO, orders add actual shipping costs. P.O.s, checks, net 30. Charge card orders may be called in, written, or faxed to us. Please! Do not email charge card numbers!

TOLL FREE: 1-888-292 BAGS (2247)

FAX US: (906) 774-9966 steves@smsmithco.com



[Books][Links][Mineral Mall][Bats & Mines][Real Estate]
[Mining Artifacts][Home Page]

Site Design By
S.M Smith Co.
Copyright © 2002
S.M Smith Co.
All Rights Reserved Worldwide.